How to reset Brother DCP 195C printer

Does your Brother DCP model printer display an error like this?

    clean unable 46
    unable to print clean pad is full

Here is the proper reset code sequence to reset DCP printers without numeric keypad:

This instruction is also applicable to printer model: Brother DCP 110C, 115C, 120C, 130C, 135C, 145C, 150C, 165C, 185C
1. Press the Menu, then Mono Start key then press the UP arrow key 4 times to make the machine enter the maintenance mode and "ERROR 46" pops-up in the display.
2. Enter maintenance mode 80: Select 8 by pressing the UP/DOWN arrow key and push OK key and select 0 and push OK key
3. Now Press MONO arrow key several times until you see PURGE:XXXXX
4. Select 2 and push OK, Select 7 and push OK, 8 and push OK, select 3 and push OK and the purge counter is now reset to 00000.
5. Press STOP/EXIT key to go to root of maintenance mode
6. Enter code 99 to exit maintenance mode: Select 9 and push OK, Select 9 and push OK.

Source

Reset Methods for All Brother Printer Models

Actuallly this tutorial reset Methods for Brother Printer is not my original tutorial. I got this tutorial from printer Indoreset Yahoo Group forum. On the forum this tutorial can be applied on All Brother Printer Models. Like HP printers, the software resetter for all Brother printer  mode not available in internet. The only method to reset problem in the brother printers you do manual reset.

The reset methode below can be applied for all models of Brother Printers. I not tried this method because I don’t have a Brother Printer to test this reset methods.  For everyone who have a Brother Printer both Inkjet Printer and Laser Printer, I hope this post can help your Brother printer problem.

The Manual Reset Methods for Brother Printers

- Disconnect Brother Printer from power cord.
- Press Set button and while holding the Set button re-connect the printer to the power cord (electric source).
- It will display an error message “Machine Error 46″ on the LCD
- After the Error code appear, press the “arrow up button” ( ^ ) there will be numbers that are going to be display.
- Choose 8 then press Set Button
- Press Arrow Up button again then choose Zero (0) and press Set Button Again, now you will enter Service Mode.
- Press “Mono Key/Button” 25 times or until “Purge Counter Appear”
- Now press arrow up (^) again then choose “2″ press Set Button
- Press Arrow Up (^) again then choose “7″ press Set Button
- Press Arrow Up (^) again then choose “8″ press Set Button
- Press Arrow Up (^) again then choose “3″ press Set Button
- The purge counter will be reset to Zero.
- Now Press Stop/Exit Button
- The printer will return to “Machine Error 46″ again
- Press Arrow Up (^) then choose 9 press Set Button
- Press Arrow Up (^) again then once more choose 9 press Set Button
- The Printer will reset then wait until it power up again.

Source the tutorial Reset Methods for All Brother Printer Models article is from Indoreset Yahoo Group

How to reset Brother MFC printer

This Reset Procedure is for Brother MFC Series Printer

Problem: Brother MFC Printer display "unable to clean" or Error 46
Solution:

- First turn of the printer
- Switch on the machine while holding down the “menu” button until all the leds are flashing on/off. Now you are in “maintenance” mode.
- Press 80
- Press the “mono start” button several times until you see “purge: xxxx”
- Press “2783” in order to reset the purge counter. You will see: “purge:0000”
- Press the "stop" button.
- Press “99” to exit the maintenance mode.